Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

2-13 INSP DRIVE V-BELT ADJ ESS00054 POWER TRAIN ESS00055 DRIVE V-BELT 1. Remove: Drive V-belt guard 1 WARNING Be sure there are shims (2 pcs) 1 between secondary fixed and sliding sheaves when installing the NEW belt. If there is no gap, the clutch engagement speed will be reduced. The machine may move unexpectedly when the engine is started. The spacer of the secondary sheave should be adjusted. CAUTION: To ensure proper clutch performance, the spacers in the secondary clutch must be re- positioned as the V-belt wears. New belt width: 35.0 mm (1.38 in) Belt wear limit width: 32.0 mm (1.26 in) 2. Measure: V-belt height a Out of s tp ae nc dif aic ra dt i Vo -n  A hd eju igs ht.

S b elt t (Below sheave surface) a : 0  2 mm (0  0.08 in) INSP ADJ