45 HYDRAULIC UNIT REMOTE HYDRAULIC CONTROL SYSTEM The hydraulic auxiliary control valves can be installed up to triple segments irrespective of installation of flow control valve. NOTE : Standard mounted valve: A Lever 1 .......................... Double acting valve with float position A Lever 2 .......................... Double acting valve with detents and self cancelling B Remote Control Valve There are 3 types of remote valves available for these models. A Double acting valve with detents and self cancelling: This valve may be placed in the detent mode. The lever will stay in this position until the pressure reaches a predetermined level or a cylinder reaches the end of its stroke.
Then it will automatically return to neutral. A Double acting valve with float position: This valve may be placed in the float mode with the control lever all the way forward. The cylinder is free to extend or retract, letting an implement such as a loader bucket follow the ground. A Single/double acting valve: This valve can be utilized as single or double acting valve by adjusting the auxiliary control valve selector knob located on the valve. 1) Turn the auxiliary control valve selector knob clockwise all the way to utilize as single acting valve. 2) Turn the auxiliary control valve selector knob anticlockwise all the way to utilize as double acting valve.
B Remote Control Valve Lever The remote control valve lever directs pressurized oil flow to the implement hydraulic system. (1) Remote control valve lever 1 (2) Remote control valve lever 2 A This float valve can be attached as the second or third segment. (1) Single / double acting valve (2) Auxiliary control valve selector knob (A) Double acting (B) Single acting