Working Operation 5 Continuous operation - Additional control circuit Additional control circuit (26/53) in Position 2 - red indicator lamp lights up. Danger to life due to incorrect operation. Observe the function of the attachment (e. g. rotating direction of attachment). Attention The additional control circuit must always be switched off unless additional equipment is operated. Operation - Float position of lift frame Attention The float position must always be switched off unless operated. Switch (26/52) in Posi- tion "0". + - P 00014,0 h 12 Km/h 0 4/4 1/2 Impulse Mode Float position switch (26/52) in Position "1". Lower the bucket onto the ground. 8 Press switch (26/8).
Float position is activated. Continuous operation Lower the bucket onto the ground. Switch (26/52) in Position "2" - green indicator lamp lights up. 53 50 52 Fig. 26 Operating the loader 54/112 TL160 Operating Manual 12.9.08 Version 1.0 P