Working Operation 5 5.2 Changing work attachments 5.2.1 General To achieve maximum utilization of the machine for a variety of applications, a great number of work attach- ments and accessories are available. The machine is equipped with a quick-attach system, to shorten the time it takes to change attachments. When mounting a multi-purpose bucket, front sweep- er, etc., an additional control circuit is required. Attention Under certain circumstances, it is possible to use the work attachments of predecessor models on our machines. When mounting work attachments of predecessor models, however, these may have to be adjusted and/or are subject to utilization restrictions.
The installation of work attachments which are not included in our product range requires our written approval. It is essential to consult your dealer before mounting such a work at- tachment. Danger of injury due to unsecured work attachments. When attachments have been removed, they must be secured against overturning to avoid possible injury to persons. 55/112 TL160 Operating Manual 12.9.08 Version 1.0