Working Operation 5 5.2.2 Assembly of work attachments Attention Ensure that the bearings of the lift frame, work attachment and quick-mount hitch are free from dirt. Before disconnecting hydraulic connec- tions, the system must be released from pressure. Procedure for changing directly mounted work at- tachments Attention In the event of a hydraulically operated at- tachment, first of all the hydraulic connec- tion must be disconnected (system must be without pressure). Lower the work attachment onto the ground and position so that it cannot tilt. Remove the pin of the linkage and the pin of the lift frame. Move the lift frame out of the work attachment and install a new tool.
56/112 TL160 Operating Manual 12.9.08 Version 1.0