Care and Maintenance 7 7.8.7 V-belt Attention If the machine features air-conditioning, only one V-belt is used. If the V-belt must be replaced, observe the size of the V-belt when ordering the spare part. 7.8.7.1 Checking the condition of the V-belt Danger of injury due to rotating V-belts. Only check and tension V-belts with the engine off. Secure the engine against unauthorized starting. Attention In case of double V-belts (machine not featuring air-conditioning), observe the following: If one damaged or worn V-belt must be replaced, always change both V-belts together. Check the entire V-belt for damage (visual inspection). Replace damaged or worn V-belts immediately.
7.8.7.2 Checking the V-belt tension Attention We recommend checking the V-belt tension using a belt tensioner gauge. Check the tension in accordance with the manufacturer’s Operating Instructions. 7.8.7.3 Checking without a belt tensioner gauge To check the tension, press the V-belt with your thumb in the middle of the greatest free length, and measure the sag. Attention Using medium thumb pressure of approx. 45 N (approx. 4.5 kg), the V-belt sag should equal 10 mm . 87/112 TL160 Operating Manual 12.9.08 Version 1.0