Care and Maintenance 7 7.8.10 Hydraulic oil tank 7.8.10.1 Checking the hydraulic oil level Check the hydraulic oil level every day with the machine standing on level ground. 3 4 Observe the level indicator on the display of the instrument panel. Read off the hydraulic oil level on the sight glass (66/1) and, if required, top up hydraulic oil using the breather (66/2). 2 7.8.10.2 Changing hydraulic oil Danger of scalding due to hot oil getting into contact with skin or eyes. Fig. 66 Checking the hydraulic oil level, changing hydraulic oil L864-720 Wear appropriate protective clothing/safety goggles. Retract all hydraulic cylinders. Stop the engine.
Remove the drain plug on the hydraulic oil tank and drain oil into a clean receptacle. Attention Collect the waste oil in a suitable container and dispose of in compliance with regulations. Flush and clean the hydraulic oil tank if required; to do so, remove the breather (66/2), return filter (66/3) and suction filter (66/4). Screw back on the drain plug carefully. Fill up with clean hydraulic oil using the return filter; to do so, open the filter cover. Install the return filter cover. 92/112 TL160 Operating Manual 12.9.08 Version 1.0