Terex TL160 — 7.8.13 Replacing the breather

Care and Maintenance 7 7.8.13 Replacing the breather Machine damage due to dirt reaching the uncovered hydraulic oil tank. Before starting, clean all parts above the tank. Attention The breather must be replaced if it is dirty, for example due to hydraulic oil vapor. Remove the breather (71/2) and dispose of according to regulations. Clean the screen (72/3) and check for damage; replace if required. Screw in new breather (72/1) with O-ring (72/2) and tighten by hand. 2 L864-724 Fig. 71 Hydraulic oil tank 1 2 3 L864-725 Fig. 72 Replacing the breather 95/112 TL160 Operating Manual 12.9.08 Version 1.0