Terex TL160 — 7.8.14 Axles

Care and Maintenance 7 7.8.14.2 Differential of rear axle with transmission Checking the axle oil level Park the machine on level ground. Remove the inspection-filling plugs (74/1). Check if the oil is up to the edge of the inspection- filling hole. Top up oil if required. Carefully close the inspection-filling plugs. Changing axle oil Park the machine on level ground. Clean the area around the inspection-filling plugs (74/1) and drain plugs (74/2). Attention Collect the waste oil in a suitable container and dispose of in compliance with regulations. Fig. 74 Checking / replacing the rear axle oil. Open the inspection-filling plugs (74/1).

Open the drain plugs (74/2) on the differential and brake housings and drain oil. Flush out the axle if necessary. Carefully close the drain plugs. Pour in oil using the inspection-filling hole until oil escapes from the other inspection-filling hole. Carefully close the inspection-filling plugs. Checking the transmission oil level Park the machine on level ground. Remove the inspection plug (75/1). Check if the oil is up to the edge of the inspection hole. Top up oil if required. Carefully close the inspection plug. Fig. 75 Checking the transmission oil 97/112 TL160 Operating Manual 12.9.08 Version 1.0