Terex TL160 — 7.8.14 Axles

Care and Maintenance 7 Replacing the transmission oil Park the machine on level ground. Clean the area around the inspection, filling (76/1) and drain plugs (76/2). Attention Collect the waste oil in a suitable container and dispose of in compliance with regulations. Open the inspection-filling plug (76/1). Open the drain plugs (76/2) on the differential and brake housings and drain oil. Flush out the axle if necessary. Carefully close the drain plugs. Pour in oil using the filling hole until oil escapes from the other inspection hole. Carefully close the inspection-filling plug (76/1). Fig. 76 Replacing the transmission oil 98/112 TL160 Operating Manual 12.9.08 Version 1.0