Komatsu — 4.8.6.e CHECKING THE OIL LEVEL IN THE FINAL TRANSMISSIONS

MAINTENANCE PROCEDURE 4.8.6.e CHECKING THE OIL LEVEL IN THE FINAL TRANSMISSIONS This check must be carried out on each transmission, with the machine at rest on level ground. The check is visual and serves to verify that the lubricant rea- ches the height of the hole (1); if this is not the case, top up using the recommended type of oil. (See "4.3 FUEL, COOLANT AND LUBRICANTS"). Use a 19 mm hexagon spanner. 188