QSB4.5 and QSB6.7 Cooling System Section 7 - Maintenance Procedures at 2000 Hours or 2 Years Page 7-5 Do not install the radiator cap. The engine is to be operated without the cap for this process. CAUTION Fill the system with a mixture of sodium carbonate and water (or a commercially available equivalent). NOTE: Adequate venting is provided for a fill rate of 19 liters [5 gal.] per minute. WARNING Coolant is toxic. Keep away from children and pets. Dispose of in accordance with local environmental regulations. Operate the engine for 5 minutes with the coolant temperature above 80°C [176°F]. Shut the engine off, and drain the cooling system. Fill the cooling system with clean water. NOTE:
Do not install the radiator cap. Operate the engine for 5 minutes with the coolant temperature above 80°C [176°F]. Shut the engine off, and drain the cooling system. NOTE: If the water being drained is still dirty, the system must be flushed again until the water is clean.