Coolant Thermostat QSB4.5 and QSB6.7 Page A-10 Section A - Adjustment, Repair, and Replacement Never operate the engine without a thermostat. Without a thermostat, the path of least resistance for the coolant is through the bypass to the water pump inlet. This can cause the engine to overheat. CAUTION CAUTION A missing check ball can cause the engine to run cold, resulting in engine damage. The thermostat contains two check balls to vent air past the thermostat when it is closed. This helps to vent air during the cooling system fill process. NOTE: Some off-highway applications use a thermostat with one check ball. When replacing a thermostat, always be sure to use the same part number.
Though an incorrect thermostat will physically fit, it will lead to improper engine operation. Remove Remove the water outlet connection capscrews. Remove the water outlet connection. Remove the thermostat. Clean and Inspect for Reuse CAUTION Do not let any debris fall into the thermostat cavity when cleaning the gasket surfaces. Damage to the cooling system and engine can occur. Clean the mating surfaces with an abrasive pad, Part Number 3823258 or equivalent, and a clean cloth.