Cummins — 4021531

QSB4.5 and QSB6.7 Coolant Thermostat Section A - Adjustment, Repair, and Replacement Page A-11 Inspect the thermostat for external damage. Also inspect for cracks, embedded debris, missing check balls, damaged seat, and other damage. Replace the thermostat if any damage is found. Measure If the thermostat is suspected to be malfunctioning, the opening temperature of the thermostat should be measured to determine if the thermostat is functioning properly. NOTE: Do not allow the thermostat or thermometer to touch the container. Suspend the thermostat and a 100°C [212°F] thermometer in a container of water. Heat the water and check the thermostat as follows: NOTE:

There are two different temperature range thermostats available, depending on the application. The nominal operating temperature is stamped on the thermostat. To verify the correct temperature range thermostat is installed, make sure to reference the appropriate part information resources. 82°C [180°F] Nominal Temperature Thermostat The thermostat must meet the following criteria: Thermostat Opening Temperature °C °F Initial Opening 79 MIN 175 83 MAX 182 Fully Opened 94 MAX 202 88°C [190°F] Nominal Temperature Thermostat Thermostat Opening Temperature °C °F Initial Opening 86 MIN 186 89 MAX 193 Fully Opened 97 MAX 207