QSB4.5 and QSB6.7 Fan Spacer and Pulley Section A - Adjustment, Repair, and Replacement Page A-17 Fan Spacer and Pulley Preparatory Steps Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. NOTE: Prior to removing the drive belt, loosen the fan pulley and cooling fan (if equipped) mounting capscrews. WARNING Disconnect the batteries. Refer to the OEM service manual for instructions. Remove the drive belt. Refer to Procedure 008-002 in Section A. Remove NOTE:
Some applications do not have a cooling fan or the cooling fan is located elsewhere on the application. If equipped, remove the cooling fan. Refer to the OEM service manual for instructions. For engines equipped with an engine driven cooling fan, the fan holds the fan pulley and spacer in place. Remove the fan pulley and spacer. If the engine is not equipped with an engine driven cooling fan, remove the fan pulley mounting capscrews and fan pulley.