Cummins — 4021531

QSB4.5 and QSB6.7 Lubricating Oil and Filters Section 5 - Maintenance Procedures at 500 Hours or 6 Months Page 5-13 Fill Clean and check the lubricating oil drain plug threads and sealing surface. Use a new sealing washer, if damaged. Install the lubricating oil pan drain plug. Automotive and Industrial Applications: Steel Oil Pan Drain Plug Torque ft-lb M18 60 MIN 44 M22 80 MIN 59 Cast Aluminum Oil Pan Drain Plug Torque ft-lb M22 60 MIN 44 NOTE: Use a high-quality 15W-40 multiviscosity lubricating oil, such as Valvoline Premium Blue®, or its equivalent, in Cummins® engines. Choose the correct lubricating oil for your operating climate as outlined in Section V.

Fill the engine with clean lubricating oil to the proper level. Refer to Procedure 018-017 in Section V. NOTE: Total system capacity assumes lubricating oil pan plus lubricating oil filter. Some applications use a slightly different lubricating oil pan capacity, and all lubricating oil quantities must be adjusted accordingly. Contact a local Cummins® Distributor if there are any questions. The oil capacity for the engine can also be found by entering the engine serial number in Quickserve® Online. (See section E of this manual to locate the ESN) Click on the "Parts" section , and select the Oil Pan.

A description of the oil pan used on the engine, including fluid capacities, will be displayed. Service Tip: If the oil capacity of the oil pan is not known, fill the lubricating oil pan to the smallest oil pan capacity . Refer to Procedure 018-017 in Section V. Then add 1 quart of oil at a time until it reaches the high mark on the dipstick. Record the number of quarts added so that capacity is known the next time the oil is drained.