24. SERVICE PROCEDURE 24.2.5 CHECK AXLE CASE BREATHER WARNING When cleaning, apply the parking brake, and lock the front and rear frames with the safety bar and pin. Remove any mud or dust that is stuck to the area around the breather. Then, remove breather, immerse in cleaning fluid and clean. When cleaning the breather, clean the breathers at two places (front and rear). Do not let dirt get into the port while breather is removed. 24.2.6 CHECK WINDOW WASHING FLUID LEVEL, ADD FLUID Do this when there is air in the window washing fluid. Check the washing fluid levels in washer tanks 1 and 2 . When the fluid has run short, add automotive window washing fluid. 1 :
Front window washing fluid tank 2 : Rear window washing fluid tank To prevent the nozzles from clogging, be careful not to let dust get into the fluid. 3-30