Mack Trucks V-MAC IV — Mack Trucks V-MAC IV — спецификация (EN)

FMI 4 FMI 10 Voltage Below Normal, or Shorted To Low Source Abnormal Rate of Change Conditions for fault code: Conditions for fault code: Short to ground on the metering side of the circuit Sensor is stuck Short circuit low Possible causes: Sensor failure Possible causes: Faulty harness Reaction from Engine Management System (EMS) Module: Sensor failure MIL lamp illuminated Cannot achieve control temperature Noticeable external symptoms: Reaction from Engine Management System (EMS) Module: Poor driveability MIL lamp illuminated FMI 12 Noticeable external symptoms: Bad Intelligent Device or Component Aborted regeneration Regeneration not possible Conditions for fault code:

Control temperature error FMI 5 Possible causes: Current Below Normal or Open Circuit Cannot achieve control temperature Conditions for fault code: Reaction from Engine Management System (EMS) Module: Short to battery on the metering side of the circuit Open in the metering side of the circuit MIL lamp illuminated Open in the ground side of the circuit Noticeable external symptoms: Aborted regeneration Possible causes: Faulty harness FMI 14 Sensor failure Special Instructions Conditions for fault code: Reaction from Engine Management System (EMS) Module: Too high MIL lamp illuminated Possible causes: Noticeable external symptoms:

N/A Poor driveability Reaction from Engine Management System (EMS) Module: MIL lamp illuminated Noticeable external symptoms: Aborted regeneration Page 64 MID 128-PPID 387