Kobelco — D. CHECKING THE AIR CONDITIONER REFRIGERANT 4-

MAINTENANCE D. CHECKING THE AIR CONDITIONER REFRIG- ERANT 1. Locate the one pin connector for the auto-accel- eration function behind the operator’s right hand console and change the position of the connec- tor as indicated in Figure 4.43A. 4 FIGURE 4.43A 2. Start the engine. Set the engine speed to the middle speed position. See Figure 4.43C FIGURE 4.43B 3. Set the machine to the conditions shown below when checking the refrigerant. See Figure 4.43D. AIR CAPACITY SELECTOR SWITCH COMPRESSOR SWITCH Air conditioner :ON switch Fan switch : HI position (Maximum/ ) Temp. adjustment :

Lower temp position ( ) switch Door / Window :Close Compressor :ON (The lamp lit up) switch TEMPERATURE SETTING SWITCH (°C °F SELECTOR SWITCH) MAIN POWER SWITCH FIGURE 4.43D SK32004096 SK210(LC)/SK250(LC)–VI Dynamic Acera OM, 09/00 Rev.2 4-43 Normal position. Auto-accel. ON Maintenance position. Auto- accel disconnected Maintenance posi accel disconnected Maintenance posi accel disconnected