Arctic Cat GmbH — 400 ENGLISCH

1. Rotate the three latches to release the fi lter housing co- ver; then loosen the inlet boot clamp. 2. Remove the fi lter housing cover and air fi lter element. 3. Fill a wash pan larger than the element with a non-fl ammable cleaning solvent; then dip the element in the solvent and wash it. 4. Squeeze the element by pres- sing it between the palms of both hands to remove ex- cess solvent. Do not twist or wring the element or it will develop cracks. 5. Dry the element. 6. Put the element in a plastic bag; then pour in air fi lter oil and work the oil into the element. 7. Squeeze the element to remove excess oil. ! CAUTION A torn air fi lter can cause damage to the ATV engine.

Dirt and dust may get inside the engine if the element is torn. Carefully examine the element for tears before and after cleaning it. Replace the ele- ment with a new one if it is torn. 8. Clean any dirt or debris from inside the air cleaner. Be sure no dirt enters the carburetor. 9. Install the air fi lter and cover. 10.Connect the inlet boot and tighten the clamp securely. AIR FILTER HOUSING DRAIN TUBE Inspect the “duck bill” drain in front of the main housing for debris and for proper sealing. 82