Arctic Cat GmbH — 400 ENGLISCH

Headlight n Note: The bulb portion of the headlight is fragile. HANDLE WITH CARE. When replacing the headlight bulb, do not touch the glass portion of the bulb. If the glass is touched, it must be cleaned with a dry cloth before installing. Skin oil residue on the bulb will shorten the life of the bulb. ! WARNING Do not attempt to remove the bulb when it is hot. Severe burns may result. To replace the headlight bulb, use the following procedure: 1. Remove the rubber boot from the back of the headlight hou- sing; then remove the three- wire connector from the bulb. 2.

Release the end of the spring clip from the headlight hous- ing taking care not to bend or deform the clip; then remove the bulb from the housing. 3. Install the new bulb into the housing; then secure with the spring clip. 4. Connect the three-wire connec- tor to the bulb; then install the rubber boot. GENERAL MAINTENANCE 85 Headlight 12V/35W/35W Taillight/Brakelight 12V/5W/21W Turn Signal Front 12V/21W Turn Signal Rear 12V/10W Number Plate Light 12V/5W