Deutz — 5.2.2 ALARMS INDICATED ON THE TRANSMISSION DISPLAY AND BY THE EDS PROGRAM

5.

ALARMS 5.2 LIST OF TRANSMISSION CONTROL UNIT ALARMS 20-81 Alarm code Alarm description Operating mode Page 53 The control unit detects that the rpm sensor nLsa is disconnected or short-circuiting to positive Limp-Home 20-108 54 The control unit detects that the rpm sensor nLsa is short-circuiting to earth Limp-Home 20-109 55 The control unit detects unreliable information coming from the rpm sensor nLsa Limp-Home 20-110 56 The control unit detects that the rpm sensor nLse is disconnected or short-circuiting to positive Limp-Home 20-111 57 The control unit detects that the rpm sensor nLse is short-circuiting to earth Limp-Home 20-112 58 The control detects unreliable information coming from the rpm sensor nLse Limp-Home 20-113 64 The control detects a conflict in the information received from the clutch pedal position sensor and clutch pedal depressed sensor, regarding the position of the pedal Emergency drive 20-114 65 The control unit detects that the clutch pedal position sensor is disconnected or short-circuiting to earth Emergency drive 20-115 66 The control unit detects that the clutch pedal position sensor is short-circuiting to positive Emergency drive oppure TC-Shutdown 20-116 67 The control unit detects that the power input to the clutch pedal position sensor is less than the prescribed value Emergency drive oppure TC-Shutdown 20-117 68 The control unit detects that the power input to the clutch pedal po- sition sensor is higher than the correct value Emergency drive oppure TC-Shutdown 20-118 69 The control unit detects one or more threshold values of the clutch pedal position sensor out of range.

Emergency drive oppure TC-Shutdown 20-119 70 The control unit detects that the calibration values of the clutch ped- al have not been saved correctly due to a defect in the EEPROM memory locations, or that the clutch pedal has never been calibrat- ed Emergency drive oppure TC-Shutdown 20-119 76 The control unit detects that the proportional solenoid valve oper- ating the main clutch is disconnected TC-Shutdown 20-120 77 The control unit detects that the proportional solenoid valve oper- ating the main clutch is short-circuiting to earth TC-Shutdown 20-121 79 The control unit detects that the forward drive solenoid valve Y3 is disconnected TC-Shutdown 20-122 80 The control unit detects that the forward drive solenoid valve Y3 is short-circuiting to earth TC-Shutdown 20-123 82 The control unit detects that the reverse drive solenoid valve Y1 is disconnected TC-Shutdown 20-124 83 The control unit detects that the reverse drive solenoid valve Y1 is short-circuiting to earth TC-Shutdown 20-125