5. ALARMS 5.2 LIST OF TRANSMISSION CONTROL UNIT ALARMS 20-82 Alarm code Alarm description Operating mode Page 85 The control unit detects a problem affecting the shuttle control le- ver.
Transmission shutdown 20-126 87 The control unit detects that the type of vehicle has not been pro- grammed correctly TC-Shutdown 20-127 89 The control unit detects an abnormal level of current drawn by the main clutch and forward/reverse solenoid valves Y1 and Y3 TC-Shutdown 20-128 90 The control unit detects an abnormal level of current drawn by the powershift solenoid valves TC-Shutdown 20-129 91 The control unit detects a conflict between values read by the nLsa and nHk sensors, the position of the clutch pedal and the position of the creeper control lever TC-Shutdown 20-130 92 The control unit has detected an abnormally high input voltage Transmission shutdown oppure TC-Shutdown 20-131 93 The control unit has detected an abnormally low input voltage Transmission shutdown oppure TC-Shutdown 20-131 94 The control unit detects that the main clutch solenoid valve is short- circuiting to positive TC-Shutdown 20-132 95 The control unit detects that the forward drive solenoid valve Y3 is short-circuiting to positive TC-Shutdown 20-133 96 The control unit detects that the reverse drive solenoid valve Y1 is short-circuiting to positive TC-Shutdown 20-134 97 The control unit detects that the transmission ECU software has not been programmed correctly TC-Shutdown 20-135 98 The control unit detects that transmission configuration data have not been programmed correctly.
TC-Shutdown 20-135 99 The control unit detects that machine configuration data have not been saved correctly (CHECKSUM ERROR) TC-Shutdown 20-135 EE The display detects a problem of communication with the trans- mission control unit. 20-136