Deutz — 5.3.2 ANALYSIS OF ALARMS

5. ALARMS 5.3 LIST OF ALARMS DISPLAYED BY SERDIA SERDIA ALARM N° 76 DESCRIPTION The engine control unit has detected an error in writing the parameters. CHECK Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position. Repeat the data entry procedure, and if the problem persists, contact Technical Assistance. SERDIA ALARM N° 77 DESCRIPTION The engine control unit has detected an error in reading the program memory during the normal control cycle. CHECK Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position. If the problem persists, contact Technical Assistance.

SERDIA ALARM N° 78 DESCRIPTION The engine control unit has detected an error in reading the work memory during the normal control cycle. CHECK Note down the values of the parameters “3895 RAMTestAddr” and “3896 RAMTestPattern” Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position. If the problem persists, contact Technical Assistance. SERDIA ALARM N° 80 DESCRIPTION The engine control unit detects an actuator power input outside the specified parameters. CHECK Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position. See if the alarm is still indicated; if so, contact Technical Assistance. 20-156