5. ALARMS 5.3 LIST OF ALARMS DISPLAYED BY SERDIA SERDIA ALARM N° 83 DESCRIPTION The control unit detects that the power input to the accelerator pedal or hand throttle position sensor is either non-existent or incorrect. NOTE If an armrest control is installed, check the hand throttle power input starting from the connector located internally of the armrest. CHECK Check that the power input to the accelerator pedal and hand throttle position sensors is correct (5 Vdc approx meas- ured between pin 1 (positive) and pin 2 (negative) of connector “X31” or pin 1 (positive) and pin 3 (negative) of connector . Turn the starter key first to “O” (OFF) and then back to the “I” (ON) position.
See if the alarm is still indicated; if so, contact Technical Assistance. 20-157 0.012.8732.4 1 2 14 20 23 24 25 14 1 2 23 25 24 20 MX2 GND4 EMR 1 2 3 J1 AS6 7 F30 7.5A +15 X31 0441.9533 11 9 10 2 1 4 0.012.8894 D0017201