EDS (Electronic Diagnosis System) POWER-SHUTTLE DIAGNOSISPROGRAMM DEST 45 20-204 Remarks • Is only diagnosed if Nmot > Nmot threshold • Switch closed if pressure Is existing • Error code is not used • Error code is not used • Diagnosis only if configured • Temperature monitoring only if con- figured • Error code upon exceeding of max. permissible upper limit temperature • Indication ”temperature warning” is independent of EC priority • Possibly sequence error from LU VPS2 • Only for T7200 • Possibly sequence error from LU VPS2 • Only for T7200 • Possibly sequence error from LU VPS2 • Self preservation • Can also lead to error ”VPS2- Plausi” (Int.
EC:47) • Only for T7200 • Only for T7200 • Possibly sequence error from LU VPS2 • LU can only be diagnosed in possible remedy Check oil pressure switch Check cabling Check system pressure Check speed sensor Nmot Check cabling Check display Check cabling Check display Reduce driving speed Reduce load Shut down engine Check cabling Check valve Check valve supply (VPS2) Check cabling Check valve Check valve supply (VPS2) Check cabling Check valve Check valve supply (VPS2) Check cabling Check valve Check valve supply (VPS2) System reaction Warning light is lighting No change of operation mode On display ”EE”, permanent beep No change of operation mode On display ”EE”, permanent beep No change of operation mode Permanent beep as long as overspeed is existing No change of operation mode Upon exceeding 5x beep, subsequently 1x beep every 2 min.
Operation mode STAND-BY STRATEGY (Powershift blocked) Operation mode STAND-BY STRATEGY (Powershift blocked) Operation mode STAND-BY STRATEGY (Powershift blocked) Operation mode STAND-BY STRATEGY (Powershift blocked) Error location/error cause System pressure plausibility Signal line display KM Signal line display K+ Speed limit exceeded Temperature exceeded Characteristic line valve LU Characteristic line valve KM Characteristic line valve K+ Retaining valve 2 LU Code 18 19 20 21 22 27 28 29 30