EDS (Electronic Diagnosis System) DIAGNOSIS OF THE INFOCENTER •Check LCD > 7 segment all segments off All segments are cleared in the indication fields for operating- hours, speed, etc. Check LCD > 7 segment horizontal segments All horizontal segments appear in the indication fields. Check LCD > 7 segment vertical segments All vertical segments appear in the indication fields. Check LCD > 7 segment all segments on All segments appear in the indication fields. Check LCD > Checkctl – all dots off All indications are deleted in the warning and maintenance display (only for INFOCENTER 3).
Check LCD > Checkctl – chess board pattern In the warning and maintenance display every field is filled with a weak grid (only for INFOCENTER 3). Check LCD > Checkctl – all dots on In the warning and maintenance display every field is filled with a slightly stronger grid than in the test step “chess board pattern” (only for INFOCENTER 3). Check LCD > End LCD menu Select this item to return to the test mode menu. TEST MODE > F5 ANALOG INPUTS Upon pressing the key F5 when the ignition is switched on the following window appears: Fig. 59 - Check analog inputs 20-229