SERDIA SETUP AND COMMUNICATIONS SERDIA always offers to go into password-protected mode or Demo mode when it has not been possible to establish com- munications successfully. Click on "Ignore". The desired mode can be selected in the "Confirm" box. 1.3.9 PASSWORD-PROTECTED MODE If "Yes" is selected to confirm, and there is no control unit, authorised users can enter a password (check with head office) and read and print configuration files, but not modify them. 1.3.10 DEMO MODE (TRAINING WITH NO CONTROL UNIT) If "No" is selected in the Confirm box, the program goes into Demo mode. 1) In this mode, the user can practice working with SERDIA, without changing any values.
2) Graphic files can be read and printed. However, the graphic files must have been stored in digital form (filename ex- tension *.egr). Also, functional tests cannot be performed on the control units. 1.4 USING THE PROGRAM Quick start: 1) In Windows, start the SERDIA program 2) In the main SERDIA screen, click on "ECU selection" 3) In the "ECU selection“ screen, select the desired control unit 4) In the main SERDIA screen, select the desired menu 20-263