SERDIA ECU SELECTION 2. ECU SELECTION 2.1 SELECTING TWO CONTROL UNITS DEUTZ engines can be equipped with two control units (for example, MVS in combination with EMS2). However, SERDIA can only communicate with one control unit. Exception: Error lists and measured values can also be read from the MVS control unit through an EMS2. SERDIA tries to set up a connection automatically to the last control unit identified. If another control unit is to be selected, the control unit recognition process must be repeated by opening the "ECU selection/Restart“ menu (this takes about 30 seconds). After they have been successfully recognised, the control unit selection screen is opened.
Only identified control units are presented for selection. Non-selectable control units are greyed out. Possible control units are: EMR1, EMR2 (Electronic engine controller) MVS (Solenoid valve system) EMS2 (Engine Monitoring System) 20-267