Deutz — 2.2 PRINTING

SERDIA ECU SELECTION 2.2 PRINTING Like the data in other windows, the identification data for the selected control unit can be printed in two ways. 1) Printing to a printer. In this case, the correct printer driver should be selected under Windows. At the top of all printouts are the logistics data: Type of control unit Date Time (as set in the Notebook system clock) Interface serial number These are followed by the control unit identification data and measurement data. 2) Control unit data can also be printed to a file. This file can then be further processed with another program, such as Excel.

The following table provides a summary of the data from the different screens, which can be saved: as printable files for further processing in other programs such as Excel. as configuration files for reporting modifications. as graphics files (*.egr), for viewing in SERDIA Demo mode. 20-268 From screen Button Filename extension Comment Service diagnosis Print (file) *.ecu for further processing in other programs, such as Excel. actual measured values File *.msv RAM Values File *.msv for further processing in other programs, such as Excel. (EMR1: Level IIIa only, EMR2: Level III, IIIa only) Graphics (AscII) *.agr for further processing in other programs, such as Excel.

(Binary) *.egr viewable in SERDIA Demo mode. Input/Output assignment Print (file) *.ino for further processing in other programs, such as Excel Configuration Print (file) *.kfg Save in file *.hex Configuration file *.tds Partial data set, Level IIIa only Overall programming ECU -> file *.hex Configuration file (Complete data set, Level III and IIIa) Error memory Print (file) *.err for further processing in other programs, such as Excel. Logistic data Print (file) *.dat