Deutz — 2.4 IDENTIFICATION AND MEASUREMENT DATA

SERDIA ECU SELECTION 2.3 PROTOCOL This menu is for DEUTZ only, and is used for configuring the interface. 2.4 IDENTIFICATION AND MEASUREMENT DATA 2.4.1 EMR1 IDENTIFICATION DATA MEASUREMENT DATA Meaning of identification data: DEUTZ part number : Part number of selected control unit. Business partner number : Product number Type of control unit selected: 1 = EMR1 2 = MVS 3 = EMS2 Hardware version number : Version number of the control unit. Software version number : Number of the EEPROM contained in the control unit. If the number before the point has changed (for example, 2.1 to 3.1), the data set will no longer match the control unit. In this case, company head office should be contacted.

Day, Month, Year : Date at which the control unit parameters were last configured. Service ID : Serial number of interface used for previous access. The first digit indicates the authorised access level. OperHourCount:Engine[h]: numero delle ore di funzionamento del motore. Number of engine start Interface serial number : serial number of interface now being used. Measured values: The "Measured values“ field shows some of the measured values directly. This selection is not configurable. 20-269