SERDIA WHAT TO DO IF...? Actuator/control unit compatibility IMPORTANT: Special feature of the 1015. Note the pump with EDC actuator. Restore the connection to the control unit and start the engine. In SERDIA, select the "Parameters" menu ->"Configuration" and, with the "PC->ECU" button, transfer the parameters to the EMR1, and start the engine. When the engine is running satisfactorily, save the parameters in the control unit. When the tests with SERDIA are completed, clear the error memory. On the SERDIA main menu, print the control unit identification list, and in the "Extras" menu, print the logistics data for the documentation record.
The document must be sent along with the old actuator to company head office. 20-312 Control unit, Part no. Software Version No. EMR1 Related actuator, Part No. Procedure for replacing the actuator 0211 1846 0211 1841 This combination must be completely replaced by combi- nation 0211 1911 / 0211 1910. Confirmation from company head office is required. 0211 1910 0211 1911 0211 2017 1.08 0211 1926 The actuator content is the same as 0211 1911. Only the attachment method for the housing is different. 0211 2017 1.11 0211 1926 0211 2686 0211 2690 1.10 0211 1926 0211 6178 0419 9995 1.31 Bosch EDC EDC actuator and pump are associated with each other. EDC actuator replacement:
additional settings required. 1) Self-calibration (Level 4) 2) Transfer EDC Data to the control unit (Level 3)