Western Star — Western Star (EN)

In An Emergency 4 D E B 3 2 + + + + + C 1 + A 01/07/2011 f545725 Disconnect jumper cables in the REVERSE order that they were connected. A. Discharged Battery B. Negative Ground Stud C. Positive Jumper Cable D. Negative Jumper Cable E. Booster Battery 1. 1st Connection: Positive Jumper Cable to Discharged Battery 2. 2nd Connection: Positive Jumper Cable to Booster Battery 3. 3rd Connection: Negative Jumper Cable to Booster Battery 4. 4th Connection: Negative Jumper Cable to Negative Ground Stud (discharged battery) Fig. 21.5, Jumper Connections 12. Disconnect the positive cable from the vehicle that provided the jump start.

Towing When it is necessary to tow the vehicle, make sure the instructions below are closely followed to prevent damage to the vehicle. 13. Disconnect the other end of the positive cable from the jump started vehicle. 14. Install the battery box cover, if equipped. WARNING Do not tow an unbraked vehicle if the combined weight of both vehicles is more than the sum of 21.4