Doosan DX225LC-3 — Engine Start

9. After warming unit, check all operating indicators to make sure that all engine systems (oil pressure, coolant, etc.) are in the normal operating range. If any problems are noticed, stop engine and correct the problem. 4 5 6 7 H H AM Normal indicators are: E F C C rpm 1 2 3 s DIG USB ISO Min Max Figure 6 FG018719 10. Check color of exhaust smoke. No color or light blue - Engine is running in good condition. Black - Incomplete combustion. Check cause. White or dark blue - Engine is burning engine oil. Check cause. 11. Check for usual engine vibration and noises. If any are heard or felt, investigate cause. NOTE:

If engine coolant temperature gauge pointer moves into the red zone, the engine coolant temperature warning light will turn "ON", a warning buzzer will sound, and the engine speed will be automatically reduced. Allow the engine to run at low idle speed until temperature gauge registers in the white zone again. When the white zone is reached, allow the engine to idle for an additional three - five (3 - 5) minutes before stopping the engine. If not allowed to idle, heat surge may develop which will damage the engine. Allowing the engine to idle will dissipate heat. Check the coolant level, look for a loose fan belt, inspect for debris around radiator, etc. DX225LC-3 Operation 3-6 No.

Instrument Panel Light or Gauge Indicator Reading 1 Engine Coolant Temperature Gauge White Range 2 Fuel Gauge White Range 3 Hydraulic Oil Temperature Gauge White Range 4 Charging Warning OFF 5 Engine Oil Pressure Warning OFF 6 Engine Coolant Temperature Warning OFF 7 Engine Check Warning OFF