12. Even if the engine starts, wait for the engine oil pressure monitor light to turn "OFF". Do not touch the control levers or control pedal while the engine oil pressure monitor is light turn "ON". IMPORTANT If the engine oil pressure monitor light does not turn "OFF", after 4 to 5 seconds have passed, stop engine immediately. Check the oil level, check for leakage of oil, and take necessary corrective action. HAOA620L Figure 7 Cold Weather Starting WARNING AVOID DEATH OR SERIOUS INJURY DO NOT USE STARTING FLUIDS. The preheat system could cause the starting fluid to explode. 1. Perform all steps in "Operational Checks Before Starting Engine". FG018148 Figure 8 2.
Set engine speed control dial to "LOW IDLE" (Figure 8). If control dial is at the "HIGH IDLE", the engine will accelerate suddenly and damage the engine. O I 3. Sound horn. 4. Turn starter switch to "I" (ON) position (Figure 9). When preheat cycle is completed, the preheat indicator light (1, Figure 10) will turn "OFF". Figure 9 FG018147 1 AM H H E F C C rpm s DIG ISO USB Min Max FG018370 Figure 10 Operation 3-7 DX225LC-3