Doosan DX225LC-3 — Engine Coolant Heater (Optional)

Engine Coolant Heater (Optional) The engine coolant heater helps start-up and operation of the engine and equipment at temperatures below -20°C (-4°F). 1. Operating environment A. Operating temperature of the engine coolant heater: -40° - 75°C (-40° - 167°F). B. Digital switch display temperature range: -20° - 75°C (-4° - 167°F). 2. Digital switch A. Outline The digital switch shown in Figure 12 operates the engine coolant heater. The operator can turn "ON" or "OFF" the engine coolant heater with the digital switch, or set up 3 desired operating time bands. The time is indicated by hours and minutes, while the day is indicated with two letter characters. FG018441 1 2 3 4 5 NOTE:

The timer display may not work properly at temperatures below -20°C (-4°F). Figure 12 Engine Coolant Heater Digital Switch When the battery is replaced or battery disconnection switch is turned "ON" or "OFF", the display will blink until button 1 ( ) is pressed. Pressing button 1 ( ) will reset system to normal condition. (Wake up function) B. Button description Button 1 ( ): Time setting and wake up function. Button 2 ( ): Preset query time activation and program. Button 3 ( ): Instantaneous heating and switch off. Button 4 ( ): The mode to reduce the time, setup time and power on time. Reduce operating time. Button 5 ( ): The mode to increase the time, setup time and power on time.

Increase operating time. C. Time and date setup Pressing the button 1 ( ) for 2 seconds will enter clock setting mode, where time and date can be set up. When the time/date blinks, use the left ( ) or right ( ) button to do the setting. Pressing the left ( ) or right ( ) button for longer than 2 seconds, fast setting is enabled. No pressing of buttons for 5 seconds will enter and save the time and date setting automatically. Operation 3-9 DX225LC-3