Doosan DX225LC-3 — Hydraulic System Warm-up - Cold Weather

3. Move safety lever (Figure 21) to "UNLOCK" position. Unlock Lock EX1300566 Figure 21 4. Slowly cycle boom, arm and bucket cylinders about five (5) times without a load to circulate the oil through the system. Do this for five (5) minutes. Figure 22 FG018384 6. Repeat Step 4 for five (5) minutes. If working speeds continue to be slow, continue to operate but use extreme caution because machine function may be erratic. 5. Set engine speed control dial to "HIGH IDLE" (Figure 23). 7. Check for clearance and fully raise the front attachment. Slowly swing clockwise three (3) revolutions. Slowly swing counterclockwise three (3) revolutions. 8.

Travel forward and reverse at low speed for two (2) revolutions of the drive sprocket. FG018154 Figure 23 DX225LC-3 Operation 3-14