Doosan DX225LC-3 — Stopping Engine

Stopping Engine NOTE: Allow engine to idle for three - five (3 - 5) minutes before stopping the engine. If not allowed to idle, heat surge may develop which will damage the engine. Allowing the engine to idle will allow the engine to cool down. 1. Park machine on firm and level ground. 2. Lower front end attachment to ground and make sure all operating controls are in "NEUTRAL". FG018379 Figure 24 3. Move safety lever to "LOCK" position (Figure 25). Unlock Figure 25 Lock EX1300566 4. Set engine speed control dial to "LOW IDLE" (Figure 26). Allow engine to idle for three - five (3 - 5) minutes. Figure 26 FG018148 5. Stop engine by turning key to "O" (OFF) position (Figure 27). O I 6.

Remove key from starter switch. FG018156 Figure 27 Operation 3-15 DX225LC-3