IMPORTANT When refilling the oil, use the same hydraulic oil as the system is filled with. 6. If oil level is above the "H" mark drain oil. A. Stop engine and wait for the hydraulic oil to cool down. B. Drain the excess oil from drain plug (Figure 18) at the bottom of the tank into an approved container, using a hose at the point (plug). NOTE: Dispose of drained fluids in compliance with all applicable environmental laws and regulations FG020067 IMPORTANT Figure 18 Dispose of waste oil/liquids in compliance with all applicable environmental laws and regulations. Disconnect the drain hose and install the protecting cap. Check for Leaks in Hydraulic System 1.
Perform a daily walk-around inspection to make sure that hoses, piping, fittings, cylinders and hydraulic motors are not showing any signs of leakage. If any is noted, determine the source of the leak and repair. Check Fuel Level 1 WARNING AVOID DEATH OR SERIOUS INJURY Use extreme safety precautions while refueling to prevent explosions or fire. 2 Immediately clean up any spilled fuel. FG020068 Figure 19 DX225LC-3 Inspection, Maintenance and Adjustment 4-26