Change of Water Separator & Pre Fuel Filter (Fuel Prefilter) 1. Open the pump room door to access fuel prefilter. 2. Close fuel drain valve. 3. Position a small container under prefilter. Drain fuel by opening drain valve on bottom of filter. NOTE: Dispose of drained fluids in compliance with all applicable environmental laws and regulations. Figure 70 4. Remove bowl using supplied tool. 5. Remove cartridge. Figure 71 6. Coat surface of packing (2, Figure 72) with fuel on new cartridge (1). 7. Tighten cartridge by hand until packing comes into contact with surface of filter housing head. 8. When packing contacts surface, tighten the cartridge about 3/4 of a turn more. 2 9.
Coat surface of seal (3, Figure 72) with fuel, and tighten the bowl with tool. 1 3 Figure 72 FG000428 Inspection, Maintenance and Adjustment 4-53 DX225LC-3 FG019441 FG01 9441 FG019631 FG01 9631