Change Swing Reduction Device Oil 2 NOTE: Change swing reduction device oil after first 500 hours of operation or rebuild, and every 1,000 hours thereafter. 1 WARNING AVOID DEATH OR SERIOUS INJURY FG020080 The gear oil is very hot after the machine has been operating. Shut all systems down and allow them to cool. Figure 89 1. Set a container under excavator. 2. Release the drain plug (3, Figure 90) and drain the swing reduction device oil into a container. NOTE: Dispose of drained fluids in compliance with all applicable environmental regulations. 3. After draining oil, tighten the drain plug. 3 Figure 90 FG020081 4.
Remove breather/fill cap (2, Figure 89) and add oil to "H" mark on dipstick (1). L H FG000419 Figure 91 Inspection, Maintenance and Adjustment 4-61 DX225LC-3