Doosan DX225LC-3 — Replace Outer and Inner Air Cleaner Filters

IMPORTANT Be sure to install the air cleaner filters facing in the correct direction. If the direction of installation is incorrect, this will damage the air cleaner filters or the engine. 7. Replace O-ring (6) of cover (2) with a new part. NOTE: When inserting the element, if the rubber at the end is wedged or the outer element is not pushed in straight, and cover is assembled by force of hook afterward, the hook and air cleaner body can be damaged. 6 2 Figure 105 FG018342 8. Install cover (3) as set forth bellow. A. Align cover with the element. 2 B. Hook the tip of hook (2) to the protruding part of the air cleaner body and lock it in position. C.

When locking hooks (2) in position, apply the hooks in turn on opposite sides (top, bottom, left, right) in the same way as when tightening bolts. D. Always install cover (3) so evacuator (4) is facing the ground (A). E. When cover (3) is installed, check that clearance between the air cleaner body and cover (3) is not too large. If it is too large, remove cover and install again. FG018548 Figure 106 2 3 4 Figure 107 A FG018334 Inspection, Maintenance and Adjustment 4-67 DX225LC-3