WARNING AVOID DEATH OR SERIOUS INJURY If there is any sign of leakage while operating transfer pump, inspect the following components to prevent fire or hazardous fuel spill: Check all hoses leading to and from the transfer pump. Check all hose clamps. Check transfer pump inlet port. The transfer pump is used to transfer fuel from a refueling source to the fuel tank. A check valve is installed in the inlet hose to prevent fuel from flowing back from fuel tank to source. A strainer is installed in inlet hose to prevent any foreign material from being introduced into transfer pump or fuel tank.
A thermal limiter, built into the motor, will automatically shut off power if motor is overheating to protect it from being damaged. Fuel 1 4 3 2 5 Fuel Tank IN IN OUT OUT FG000161 Figure 160 Inspection, Maintenance and Adjustment 4-97 DX225LC-3 Reference Number Description 1 Body 2 Check Valve 3 Strainer Reference Number Description 4 Strainer Cap 5 Inlet Hose