1. Remove strainer cap (4, Figure 160) from strainer (3, Figure 160) on end of inlet hose (5, Figure 160). SENSOR POWER PUMP NOTE: Keep strainer cap (4 , Figure 160) in a safe location to reseal strainer (3 , Figure 160) after refueling is complete. CONTROL UNIT FOR FUEL FILLER PUMP START STOP 2. Insert inlet hose (5, Figure 160) into refueling tank. 3. Push fuel pump "START" switch (Figure 161) inside of battery box on front side. 4. Once fuel transfer is completed, the pump will automatically turn "OFF". 5. Lift inlet hose (5, Figure 160) from fueling source and push "START" switch and push "STOP" switch after two - three seconds to drain remaining fuel from hose to fuel tank. 6.
Install strainer cap (4, Figure 160) on inlet strainer (3, Figure 160) and return hose (5, Figure 160) to storage position. Figure 161 FG019405 DX225LC-3 Inspection, Maintenance and Adjustment 4-98