Point Operations [Point 1 I Disassembly: Be careful as oil exists in the torque convert - er ASSY. The torque converter ASSY cannot be disas - sembled. Reassembly: Coat grease on the seal ring and oil seal lip be - fore installation. Reassembly: Rotate the torque converter ASSY to make the extension pawl fit into the oil pump drive gear groove. [Point 21 Disassembly: SST 09950 - 4001 0 [point 31 Disassembly: SST 09950 - 4001 0 [Point 41 Disassembly: After removing the set bolt and lock plate, ro - tate the idle shaft counterclockwise for removal. Reassembly: Clean the idle shaft threaded portion, and check if it can be screwed in lightly without the idle gear. Reassembly:
Tighten the idle shaft t o the specified torque. T = 4.90 - 9.81 N-m (50 - 100 kgf - cm) [3.62 - 7.24 ft - lbfl Tigten the set bolt after locking with the lock plate.