Inspection: Measure the clutch plate thickness. Standard thickness: 2.0 m m (0.079 in) Limit thickness: 1.8 mm (0.071 in) Inspection: Measure the camber plate convex height. Standard convex height: 3.4 m m (0.134 in) Limit convex height: 3.1 m m (0.122 in) a Clutch gear sldi Reassembly: Install the camber plate on the clutch drum, with the A punch mark on the upper side. , - = a P~ston side Reassembly: Install the clutch plates and clutch discs al - ternately on the clutch drum while coating torque converter oil. Number of clutch disc plates Camber plate Reassembly: Adjust the clearance between the backing plate and clutch disc. 1.
Install the camber plate, clutch plate, clutch disc, back - ing plate and snap ring on the clutch drum. 2. Measure the clearance between the backing plate and clutch disc with a thickness gage. Standard clearance: 4 - disc specification: 0.65 - 1.2 mm (0.0256 - 0.047 in) 5 - disc specification: .O - 1.6 m m (0.039 - 0.063 in) I 5K engine 4 4Y. 1 DZ.22 engine 5