Toyota — Transmission

[Point 41 Reassembly: SST 0931 1 - 23000 - 7 1 [Point 51 Disassembly: Tap the end of the input shaft with a plastic hammer to extract it toward the front (differential) side. / Inspection: Measure the input shaft bend. I I Limit bend: 0.1 mm (0.004 in) Reassembly: Coat grease (molybdenum disulfide grease) on the spline portion (indicated by the arrow). Tight plug / Reassembly: Install the tight plug after inserting the input shaft. r' / 2.5 mm (0.098 in) [Point 61 Disassembly.reassembly: Measure the backlash of each gear. Standard backlash: 0.03 - 0.18 mm (0.0012 - 0.0071 in) Limit backlash: 0.25 mm (0.0098 in)