Heel contact Face contact Decrease the drive pinion adjusting shim thickness to bring the pinion closer to the ring gear, and move the ring gear away from the pinion for backlash adjustment. Toe contact Flank contact Increase the drive pinion adjusting shim thickness to bring the pinion away from the ring gear, and bring the ring gear closer to the pinion for backlash adjustment. [Point 41 Disassembly: SST 09950 - 2001 7 1 1 [Point 51 Match mark Disassembly: Punch a match mark on the differential up - per and lower cases. Reassembly: Align the case match marks for reassembly. Reassembly:
After washing and degreasing the female screw portion of the lower case, coat thread tightener (08833- 00070) on the threaded portion of the set bolts. [Point 61 Inspection: Measure the backlash between the side gear and pinion gear. Install the side gear and pinion gear on the case. Lightly push the spider t o bring pinion gear and side gear close to the thrust washer for measurement. Backlash: 0.2 - 0.3 mm (0.008 - 0.012 in)