Reassembly: Coat liquid packing (08826 - 00080) on shoe hold down pin and the contact face on the rear side of the backing plate to eliminate any clearance. [Point 21 Disassembly: SST 097 1 7 - 2001 0 Inspection: Measure the free length of the anchor - to - shoe spring. Standard free length: 102 mm (4.02 in) Limit free length: Replace if there is any clearance in the coil. Reassembly: SST 097 1 8 - 2001 0 [Point 31 Inspection: Measure the free length of the strut - to - shoe spring. Standard free length: 20 mm (0.79 in) Limit free length: 17 mm (0.67 in)