Lift Bracket Roller Adjustment / mast lnner mast 1 . Lift roller and side roller clearance adjustment (1) Measure the clearance when the center of the lift bracket upper side rolier is 100 m m (3.93 in) from the top of the inner mast. (2) The upper lift rollers need no adjustment because they are fixed by snap rings. (3) Measure the clearances at the middle and lower lift rollers after removing the side rollers. Shift the lift bracket to one side to bring the roller into contact with the inner mast, and measure the clearance between the roller side face and the mast at the closest position on the opposite side t o the following value by inserting the lift roller shim.
0 - 0.8 mm (0 - 0.031 in) Shim thickness: 0.5 and Standard clearance C = .O mm (0.020 and 0.039 in) 1